Fire Pit Rental – A fire pit is the most basic, but also the most attractive, type of garden heater and it can be constructed very simply using a limited quantity of DIY ability.
What’s a fire pit?
In its simplest form, a fire pit isn’t anything more than a hole in the floor into which coal or wood could be put and ignited. Most fire pits are nonetheless more involved than this and their design takes account of aesthetics and a more permanent structure.
Generally some form of seating or benching, along with a hard landscaped area, are also a part of most fire pit jobs.
The Fundamental design
The key functional quality of a fire pit is the excavated hole in the floor. This hole is generally round and has a diameter of not less than 18 inches. Most fire pits will be between 2 and 3 feet in diameter and the bottom of the pit will probably be between 6 inches and one foot under the surrounding finished floor level.
In order to make the fire pit more functional, more attractive and more flexible, a little wall is constructed around the outside of the pit. It functions to contain the fire, clean up the appearance and radiate and convect heat outwards from the fire pit.
A more comprehensive design also supplements the fire pit with some encompassing tough landscaping and masonry seat chairs.
1. The first task is to get a suitable location. This should be away from buildings and other flammable materials and vegetation.
2. Next, sand or chalk should be utilised to make a visible impression of this pits shape on the floor allowing the pit to be excavated. This might expect a dig of about 18 inches. This should require nothing more than a spade.
Important: If you would like to build the “fire pit wall” on a concrete foundation, then the pit diameter should be adjusted to allow for the extra width of this fire pit wall. This may save the need for a separate footing.
3. Once the fire pit foundation is complete and the cement has set, it will be possible to build the fire pit wall. The wall will operate around the outside of the fire pit and then enclose it.
This wall may be made from loose-laid brick or stone, or of mortar bonded masonry. If the latter is true, then an extra mortar coating can be used to line the internal surface of the wall. In either event the stones or bricks should be staggered for stability and visual appeal.
4. Whilst this completes the main fire pit undertaking, pavers, paving slabs, cobbles or brick sets can be used to create a clean and hard wearing surface round the fire pit.
Furthermore, a simple but attractive seating area could be constructed round the fire pit by using exactly the same style of stones or bricks to make a basic flat topped bench.